网上棋牌

Welcome to the official website of Wuxi Tonghui Steel Grating Co., Ltd.!

13951500039

20 years of experience in the steel grating industry



Switchboard: 86-510-83887016

Fax: 86-510-83887036

   13951500039 Contact: Mr. Li 13951500039

   Email: 13951500039@126.com

   Address: Qibei Road, Yuqi Supporting Zone, Huishan Economic Development Zone, Wuxi City



What are the application methods of galvanized steel grating / channel steel grating
HomeNews Center 〉 What are the application methods of galvanized steel grating / channel steel grating

The scope of application of steel gratings is becoming more and more extensive. The use of steel gratings in channels is still relatively common. Steel gratings can be used in the corridors of channels.

It can be used in stair steps, steel grating has strong bearing capacity, simple structure, economical and applicable, ventilation and light transmission, anti-skid and explosion-proof features, etc., in industry

It has a very important position, has a wide range of applications, and has a bright future. Various types of steel gratings can be customized, and various shapes can be customized according to customer supply.

The method of steel grid plate equipment begged: 1. Steel grid plate should be connected to the drawing plan before the equipment to inspect the steel grid plate.

Works for use.

2. The equipment must be in order before the steel grating equipment, and the equipment must be ordered according to the drawing number.

3. It is necessary to have a flat steel bar policy and a load bar policy when equipment steel grids are installed . The equipment process must be planned from the steel ladder on the first floor to the adjacent exhibition.

4. At least two sets of equipment clamps must be equipped on each steel grid plate. The welding contact points must be spray-painted at the end of welding to prevent rust.

5. One piece of steel grating equipment must be fixed to prevent people from standing on the unfixed steel grating when working at height.

6. When working on steel gratings at high altitude, the equipment personnel should fasten the safety belt, and the steel gratings should be well protected.

7. Stop the steel grid plate aerial work equipment staff pockets with small things and accessories (wrenches, welding rods, etc.) to avoid falling and hurting people.

Steel gratings are used in channels, and the common equipment methods on equipment construction can be divided into: permanent welding and equipment clamps. Equipment clips from top to bottom

Clip, M8 hex nut, washer, etc. For steel grids that are often open, they can be fixed with specially planned steel grid equipment racks. Guidelines

Each steel grid plate (calculated about 1 square meter) is used for four sets of equipment clamps. For those that do not need to be changed, it is advisable to use permanent welding and compare the equipment clamps.

Safer to use and more durable. Dongchi Steel Grating Factory is a professional manufacturer of hot-dip galvanized steel grating, cold-galvanized steel grating, special-shaped steel grating, plug-in steel grating

, Semi-plugged steel grating, channel steel grating , steel grating ceiling, trench cover, stainless steel grating manufacturer, excellent quality, fast shipment, good credit.


News Center Application Cases Honor Customer Service Support Ordering Instructions Common Problems Expertise Contact Us