网上棋牌

Welcome to the official website of Wuxi Tonghui Steel Grating Co., Ltd.!

13951500039

20 years of experience in the steel grating industry



Switchboard: 86-510-83887016

Fax: 86-510-83887036

   13951500039 Contact: Mr. Li 13951500039

   Email: 13951500039@126.com

   Address: Qibei Road, Yuqi Supporting Zone, Huishan Economic Development Zone, Wuxi City



Steel grating
HomeProductsGratings seriesGratings 〉 Gratings

The power grid steel grid can also be called platform steel grid, hot-dip galvanized steel grid platform. It is a steel grid product widely used in various fields in industry in recent years. Its surface has strong resistance, especially when the crossbar spacing When it is 50mm, the steel grating has strong resistance to lateral impact and is a new type of construction product.
I. Design and manufacturing requirements of steel grids in power plants
1. In order to ensure the safety of the person, the clearance of the steel grid plate above the place where people can not let the ball with a diameter of 20mm fall through.
2. In order to prevent the danger caused by the object falling through the steel grating, the clearance of the steel grating can not let the sphere with a diameter of 35mm fall through.
3. In order to prevent the risk of falling, the steel grid plate should be fixed by welding during installation. The steel grid plate is installed according to the steel structure flat piece. Do not move or leave the support frame laterally after installation. The support length of the steel grid plate on the support frame at both ends in the direction of flat steel must not be less than 25mm. The steel grid plate that needs to be moved and disassembled must be fixed with a special mounting clip for the steel grid plate, otherwise the related components will be displaced. The mounting clip can be supplied by the manufacturer according to the requirements of the purchaser. In addition to the mounting clip made of stainless steel, the mounting clip made of carbon steel must be hot-dip galvanized. It is recommended that the bolts used for the mounting clip be hot-dip galvanized. The diameter of the bolt must not be less than 8mm. , The number of mounting clips for each steel grid plate shall not be less than 4.
4. Composite steel grating is also one of the products widely used by the platform.
5. We should regularly check the tightening status of the accessories to avoid the risk of corrosion or loosening of the position of the clamping parts.
1. The height (or width) and thickness of the flat steel plate; the height of the flat steel is usually 20mm, 25mm, 30mm, 32mm, 35mm, 40mm, 45mm, 50mm, etc. The thickness of steel flat plate steel is 3mm, 4mm, 5mm;
2. Spacing of loaded flat steel: the center distance between two adjacent loaded flat steels, usually 30MM, 40MM or 60mm;
3, the distance between the crossbars: the center distance between two adjacent crossbars is usually 50MM, 100, two, can be produced according to customer requirements.
4. Surface treatment: hot-dip galvanized, cold-dip galvanized, painting, no treatment.
Classification of Steel Gratings in Power Plants
1. According to the production method, it is divided into: pressure welded steel grating and pressure lock steel grating.
2. Divided according to material: ordinary carbon steel steel grating and stainless steel steel grating.
3. According to the surface treatment, it is divided into: hot-dip galvanized steel grating and painted steel grating.
4. According to the scope of use: platform steel grid, gutter cover, composite steel grid, plug-in steel grid, steel grid ceiling


The power grid steel grid can also be called platform steel grid, hot-dip galvanized steel grid platform. It is a steel grid product widely used in various industries in recent years. When it is 50mm, the steel grating has strong resistance to lateral impact and is a new type of construction product.
I. Design and manufacturing requirements of steel grids in power plants
1. In order to ensure the safety of the person, the clearance of the steel grid plate above the place where people can not let the ball with a diameter of 20mm fall through.
2. In order to prevent the danger caused by the object falling through the steel grating, the clearance of the steel grating can not let the sphere with a diameter of 35mm fall through.
3. In order to prevent the risk of falling, the steel grid plate should be fixed by welding during installation. The steel grid plate is installed according to the steel structure flat piece. Do not move or leave the support frame laterally after installation. The support length of the steel grid plate on the support frame at both ends in the direction of flat steel must not be less than 25mm. The steel grid plate that needs to be moved and disassembled must be fixed with a special mounting clip for the steel grid plate, otherwise the related components will be displaced. The mounting clip can be supplied by the manufacturer according to the requirements of the purchaser. In addition to the mounting clip made of stainless steel, the mounting clip made of carbon steel must be hot-dip galvanized. It is recommended that the bolts used for the mounting clip be hot-dip galvanized. The diameter of the bolt must not be less than 8mm. , The number of mounting clips for each steel grid plate shall not be less than 4.
4. Composite steel grating is also one of the products widely used by the platform.
5. We should regularly check the tightening status of the accessories to avoid the risk of corrosion or loosening of the position of the clamping parts.
1. The height (or width) and thickness of the flat steel plate; the height of the flat steel is usually 20mm, 25mm, 30mm, 32mm, 35mm, 40mm, 45mm, 50mm, etc. The thickness of steel flat plate steel is 3mm, 4mm, 5mm;
2. Spacing of loaded flat steel: the center distance between two adjacent loaded flat steels, usually 30MM, 40MM or 60mm;
3, the distance between the crossbars: the center distance between two adjacent crossbars is usually 50MM, 100, two, can be produced according to customer requirements.
4. Surface treatment: hot-dip galvanized, cold-dip galvanized, painting, no treatment.
Classification of Steel Gratings in Power Plants
1. According to the production method, it is divided into: pressure welded steel grating and pressure lock steel grating.
2. Divided according to material: ordinary carbon steel steel grating and stainless steel steel grating.
3. According to the surface treatment, it is divided into: hot-dip galvanized steel grating and painted steel grating.
4. According to the scope of use: platform steel grid, gutter cover, composite steel grid, plug-in steel grid, steel grid ceiling


News Center Application Cases Honor Customer Service Support Ordering Instructions Common Problems Expertise Contact Us